Liquid beer line cleaner for use in periodical CIP cleaning of beer lines, pipes, cooling units and drawing equipment.
Formulated for the removal of beer stain, scale and inorganic deposits.
When used in conjunction with SANILINE, will effectively clean and sanitise surfaces.
Use 15ml KLEENLINE per 1L water. KLEENLINE should be used STRICTLY in accordance with the method prescribed by your brewery. For best results, use in conjunction with Milestone SANILINE as per instructions.
CAUTION: Add KLEENLINE and SANILINE separately to the water in the detergent drum (Add chemical to water, NOT water to chemical).
DO NOT MIX KLEENLINE and SANILINE together in the concentrated form, NOT for use with older type (i.e. tinned copper) temprites.
Mixing Instructions – Add 75ml of KLEENLINE, plus 75ml SANILINE (separately) per 5L of water, leave solution in beerlines for a minimum of 2 hours for best results and then flush with clean water. Use pH strip to ensure all chemicals have been flushed from lines prior to re-use.
Please Read Safety Data Sheet Before Using This Product
Classifiedas a Class8 Dangerous Good. CORROSIVE LIQUID, BASIC, INORGANIC, N.O.S.UN3266. Acute Toxicity – Oral: Category4.Eye Damage/Irritation: Category 1. Skin Corrosion/Irritation: Category 1B. Harmful if swallowed. Causes severe skin burns andeyedamage. The followingprotective equipment shouldbe worn when handling product directly. Keep out of reach of children. Wash contaminated skin thoroughly after handling. Do not eat, drink or smoke when using this product. Store in a closed container.
